MEP WORKS AND SERVICES

COMPREHENSIVE ELECTRICAL, MECHANICAL, AND PLUMBING SOLUTIONS


Expanding our commitment to excellence, the MEP division of our esteemed company, extends our renowned expertise in Controls and Automation services to encompass comprehensive electrical, mechanical, and plumbing solutions. Along with our focus on the Industrial and Building Automation market segments, our MEP division offers end-to-end services, including design, assembly, supply, installation, testing, and commissioning. From residential to commercial and industrial projects, Confido MEP Works and Services ensures the highest quality, reliability, and efficiency in all our endeavours.


Electrical Works:

Confido excels in risk audit through preventative electrical maintenance, offering services such as maintenance of distribution boards, control panels, low voltage (LV) panels, capacitor banks, and lighting systems. Our expertise includes:

  • Electrical Engineering (Design & Product Selection)
  • MV/LV Distribution Panels: MCCP, Power Distribution Panel, Motor Starter Panel
  • Standby and Emergency Generator Systems
  • Emergency and Exit Lighting Systems
  • BMS & DDC Panels
  • Busbar System Installation
  • Level Transmitters, Level Switches, and Controls
  • Cable Laying & Termination Works
  • Electrical Containment Systems (Cable Management System)
  • Control Panels: Standard Panel (IP55/IP65 & IP66) & Explosion Proof Panel (NEMA & ATEX)
  • Control System Automation: Fuel Pumping Systems, Lift Stations, Wastewater Treatment Pumping Systems


Mechanical Works:

Confido offers a range of mechanical services, including general maintenance, preventive maintenance, installation of mechanical assets, attending to reactive complaints, and troubleshooting. Our services cover:

  • Heating, Ventilation & Air Conditioning (HVAC) System
  • Chilled Water System, Chiller Plants, Cooling Towers, FAHU, AHU, FCU, Thermal Insulation System
  • Duct Works & Installation
  • Centrifugal Pumps
  • Positive Displacement Pumps
  • Submersible Pumps
  • Electric Motor and Engine Driven Pump Skids
  • Fixed or Mobile (Trolley/Trailer Mounted)


Drives & Drive Systems:

Confido provides solutions for drives and drive systems, including gear motors, drive electronics, electric motors, variable frequency drives, and UPS systems.

  • Gear Motors – Helical Inline, Parallel Shaft, Helical Bevel, Worm and industrial Gear Units.
  • Drive Electronics – Variable Frequency / Decentralized Drive System.
  • Electric Motors – Low, Medium, High Voltage, Explosion proof ( NEMA/ATEX)
  • Variable Frequency Drives – Low, Medium and High Voltage
  • UPS Systems


Flow Meters & Metering Systems:

Confido provides a comprehensive range of flow meters and metering systems, along with related automation accessories. Our offerings include,

  • Water Meters, BTU meters.
  • PD Meters, Electromagnetic Meters, Mechanical and Electronic Counters.
  • Control Valves, Strainers, Air Separators.
  • Flow Computer, Grounding System and Automation Accessories.
  • Flow meters Calibration.


Fuel Transfer System:

Confido specializes in fuel transfer systems, including storage tanks, day tanks, fill point cabinets, fuel transfer pump skids, level sensors, pressure vacuum vents, PLC control panels, leak detection systems, double-wall piping, GRP pipe cladding, metering systems, fuel filtration, polishing, loading, and unloading arms, and grounding systems.

Confido is a specialist in providing comprehensive fuel transfer systems, catering to a wide range of needs in this critical area. Our expertise covers,

  • Storage Tanks and Day Tanks (as per UL / BS Standards).
  • Fill Point Cabinets.
  • Fuel Transfer Pump Skids.
  • Level Sensors & Pressure Vacuum Vents and accessories.
  • PLC Control Panels.
  • Leak Detection System.
  • Double Wall Piping and GRP pipe cladding.
  • Metering System.
  • Fuel Filtration and polishing.
  • Loading and Unloading Arms.
  • Fuel Dispensers.
  • Grounding System.


Plumbing Services:

Confido offers plumbing services, including design, assembling, supply, installation, testing, and commissioning. We are the first port of call for the plumbing needs of our clients, delivering an exceptional standard for following services,

  • uPVC, PPR, HDPE complete piping works
  • Pump & Tank installation.
  • Sewage & Water treatment plants
  • Water booster & Transfer systems.


Services and Repairs:

Confido provides a range of services throughout the project lifecycle, from design to construction to testing and commissioning.

  • Design Stage 

Research, conceptualization, feasibility assessment, establishing design requirements, preliminary design, detailed design, production planning and tool design, and production. 

  • Pre-Construction Stage

The pre-construction phase includes creating a strategic plan for the project, creating a design, securing permits or entitlements, and gathering the labour and resources required for construction. 

  • Construction Stage

Construction Planning, Detailed Wiring Diagrams and Conduit / Wire Scheduling. Technical Assistance for Equipment, System Installation at Site, Installation Quality Control Checklists.

A Construction Phase Plan is a key document that details the health and safety risks associated with the construction phase of the project and the control measures that will be implemented to minimize risks or where possible, eliminate them.

  • Testing & Commissioning

Start Up Inspections and Testing of all Installed equipment & Instruments. Ensure the system loop test was done. Loop checking is the process that confirms the components wired correctly and helps to ensure that the system is functioning as designed.

Commissioning – entails running and testing all areas of each system to ensure the system performs as anticipated and to correct any remaining problems prior to Plant Operational Start-up. Start-up – the commencement of actual plant operations.

  • After Sales Support 

Warranty Services, Preparing Service/Site Report, Periodic Maintenance Contract and Fast Parts Service.

  • Annual Maintenance Contract (AMC) 

We Will Fix It has developed a simple, cost-saving annual maintenance contract to cover all your system maintenance. Get year-round Servicing as well as 24-hour qualified support for System. Fully qualified, specialized Engineers & technicians are on-hand to deliver the same level of service and workmanship that customers have come to expect from We Will Fix It - with the added bonus of emergency 24/7 assistance, 365 days a year.

  • Other Services
  • Pump Performance Test
  • Pump Hydrostatic Test and Laser Alignment Test & Report
  • PD Flowmeters Calibration
  • Energy saving Reports for, 
      • Pumps
      • PD Flowmeters 
      • Motors
      • LV Panels
      • Control Panels.
      • MCC Panels. 
      • AHU, FAHU
      • Chillers
      • Chill Water pipes and Insulation services. 
      • Chill Water pipe Cladding.
      • PPR, HDPE Pipe services.